<whcvr class="qajbwp"></whcvr>

钱柜777国际

焊接机械手臂:机械手臂的使用注意事项

日期:2025-04-23 11:40

  1.使用机械手时,必须使用清洁、干燥的压缩空气。

When using a robotic arm, clean and dry compressed air must be used.

  2.仅允许在身体状态良好时启用本设备。

2. This device is only allowed to be used when the body is in good condition.

  3.使用前先检查相应的承重螺栓是否松动。

3. Before use, check whether the corresponding load-bearing bolts are loose.

  4.每次使用前,检查设备有无磨损或损伤。在无法确保的情况下,不要使用已检测出有磨损及损伤的系统。

4. Before each use, check the equipment for wear or damage. Do not use systems that have been detected for wear and damage in situations where safety cannot be guaranteed.

  5.设备启用前需打开各个压缩空气管路阀门,检查气源压力是否满足要求,压缩空气中不能含油和水分。

DSC01746

Before using the equipment, it is necessary to open the valves of each compressed air pipeline and check whether the air source pressure meets the requirements. The compressed air should not contain oil or moisture.

  6.检查过滤减压阀的滤杯中是否有超过刻度标记的液体,及时排空,以防污染元器件。

6. Check if there is any liquid in the filter cup of the filter pressure reducing valve that exceeds the mark on the scale, and drain it in a timely manner to prevent contamination of the components.

以上就是有关 焊接机械手臂 的介绍,想了解更多的内容请点击:http://www.xuanyerobot.com 我们将会全心全意为您提供满分服务,欢迎您的来电!

The above is an introduction to welding robotic arms. To learn more, please click: http://www.xuanyerobot.com We will wholeheartedly provide you with full score service. Welcome to call us!

钱柜777国际

公司/地址

钱柜777国际(唐山)科技有限公司

河北唐山芦台经济开发区散热器产业园区

电话/传真

电话:18622675555/18931468400

传真:022-69351888

邮箱/网址

邮箱:contact@henso.net

网址:www.henso.net

微信二维码
钱柜777国际